yamaha RX-V565 or 65 Series - Blu-ray Forum

monnie · 11-18-2009, 08:15 PM

Hi

I have just had my Yamaha 565 receive get the new firmware software update and everything now works fine but when i turn the receiver off the red standby light doesn't come on.

I have looked through the manual and on the front panel display it doesn't mention anything standby.

Monnie

monnie · 11-18-2009, 11:09 PM

All i would like to know from any people who have the lastest Yamaha's from 365 to 765 does there standby light come on when you turn off so it is in standby mode?

Please Help

Monnie

OneDropCode1 · 11-19-2009, 02:05 AM

Mine sometimes goes off or stays on but it doesn't bother me, as long as standby still works. I don't think mine can upgrade to latest firmware.

Edit: Forgot to say, did you enable standby mode? It's in setup > Function setup > HDMI > Standby

monnie · 11-19-2009, 08:06 AM

Yes you can get the firmware update it is from the 465 to 765 in Australia and the 365 to 765 in the US and it doesn't bother me it's just that i had someone do my setup for me and when i got firmware done everything had changed.

Monnie

ninja1 · 11-19-2009, 09:41 AM

I think you have to set HDMI Through to 'ON'
and set HDMI control to 'OFF'
but I don't like it ,I set it light off when in mode 'Standby'

dand · 12-24-2009, 07:46 PM

On my RX-V465 the only light that comes on when receiver is off is the HDMI through light.I haven't updated firmware at all and have had it for over a year.I just ordered a RX-V665 and will post what lights up on that when off soon.

DanD

arrt vandelay · 12-24-2009, 07:53 PM

you have to be using the "passthrough" function for the light to come on. i currently have this set to "off" so when my rx v765 is powered off, no standby light is on...

AnimeAnt · 12-31-2009, 08:49 PM

I have the Yamaha RX-V565 and SONY BD S360, for some reason I am getting lower volume on the Uncompressed PCM 5.1 than ordinary Dolby? I've tried everything. Please assist!!!

11-18-2009, 08:15 PM	#1
monnie Senior Member Member since:Apr 2007 Location:Sydney Australia 4K collection:335 Blu-ray collection:606	yamaha RX-V565 or 65 Series Hi I have just had my Yamaha 565 receive get the new firmware software update and everything now works fine but when i turn the receiver off the red standby light doesn't come on. I have looked through the manual and on the front panel display it doesn't mention anything standby. Monnie

11-19-2009, 02:05 AM	#3
OneDropCode1 Active Member Member since:May 2009 Location:Southern CA Home Theater Gallery:30 4K collection:63 Blu-ray collection:485	Mine sometimes goes off or stays on but it doesn't bother me, as long as standby still works. I don't think mine can upgrade to latest firmware. Edit: Forgot to say, did you enable standby mode? It's in setup > Function setup > HDMI > Standby Last edited by OneDropCode1; 11-19-2009 at 02:08 AM.

11-19-2009, 09:41 AM	#5
ninja1 Junior Member Member since:May 2009	standby I think you have to set HDMI Through to 'ON' and set HDMI control to 'OFF' but I don't like it ,I set it light off when in mode 'Standby'

12-31-2009, 08:49 PM	#8
AnimeAnt Junior Member Top contributor Member since:Nov 2009 Location:Durban, South Africa Home Theater Gallery:2 4K collection:97 Blu-ray collection:1756 Blu-ray reviews: 16	Uncompressed PCM 5.1 lower volume than Doldy Digital? I have the Yamaha RX-V565 and SONY BD S360, for some reason I am getting lower volume on the Uncompressed PCM 5.1 than ordinary Dolby? I've tried everything. Please assist!!!

Similar Threads
thread	Forum	Thread Starter	Replies	Last Post
Yamaha RX V565 Receiver questions	Receivers	Automission	1	01-22-2010 03:28 PM
need help upgrading firmware for yamaha Rx-v565	Receivers	monnie	3	09-17-2009 01:05 AM
Yamaha NS-325 Series	Speakers	Alaskankaijudude	7	06-29-2008 12:17 AM
Yamaha NS series speakers	Speakers	paulyg	2	03-23-2008 06:12 PM

11-18-2009, 11:09 PM	#2
monnie Senior Member Member since:Apr 2007 Location:Sydney Australia 4K collection:335 Blu-ray collection:606	All i would like to know from any people who have the lastest Yamaha's from 365 to 765 does there standby light come on when you turn off so it is in standby mode? Please Help Monnie

11-19-2009, 08:06 AM	#4
monnie Senior Member Member since:Apr 2007 Location:Sydney Australia 4K collection:335 Blu-ray collection:606	Yes you can get the firmware update it is from the 465 to 765 in Australia and the 365 to 765 in the US and it doesn't bother me it's just that i had someone do my setup for me and when i got firmware done everything had changed. Monnie

12-24-2009, 07:46 PM	#6
dand Member Member since:Dec 2008 4K collection:109 Blu-ray collection:548 DVD collection:4 Blu-ray reviews:4	On my RX-V465 the only light that comes on when receiver is off is the HDMI through light.I haven't updated firmware at all and have had it for over a year.I just ordered a RX-V665 and will post what lights up on that when off soon. DanD

12-24-2009, 07:53 PM	#7
arrt vandelay Senior Member Member since:Sep 2008 Blu-ray collection:26 Trading Score:6	you have to be using the "passthrough" function for the light to come on. i currently have this set to "off" so when my rx v765 is powered off, no standby light is on...

Best Blu-ray Movie Deals