Harmony One Remote

[Genocide316]

I posted this on the Harmony owners thing but didn't get a response

Just picked up a Harmony One yesterday...Think I have it figured out for the most part....one thing I need help with if you guys don't mind. I have the activity set up to Watch TV and it turns on everything correctly but puts the TV on channel 4 instead of 3. I've been through the different options 3 or 4 times and can't seem to find how to fix it . Any help is much appreciated.

[HAMP]

I'm not a Harmony remote user, but I do have a question about your problem:

If you don't use the Harmony remote and manually turn on the tv, will it still goto channel '4'?

or also

If you use the remote that came with the TV, does it still goto channel '4'?

[moviefan]

Originally Posted by HAMP

I'm not a Harmony remote user, but I do have a question about your problem:
If you don't use the Harmony remote and manually turn on the tv, will it still goto channel '4'?
or also
If you use the remote that came with the TV, does it still goto channel '4'?

Good questions here.
I have the Harmony One, and I don't think it changes channels when you set an activity as all info for the TV is sent from the receiver.
Gheck the manual, and phone Logitech. I found them to be very helpful when I got my One.
It can be confusing when you first set it up, but you will soon find it gets easier ... good luck and enjoy!

[snoman_99]

hmm... we didn't seem to have that problem... just make sure when you are setting up the remote to watch tv that you make sure you select the tv should be tuned to channel 3.

if correct, believe this is asked when you are setting it up through the logitech software that comes with the remote.

hope this helps,

J & Jen

[blujacket]

Genocide316, After you start your "Activity" and all is good but your tv changing to the correct channel, press the "Help" button. It should fix it and ask to confirm.

[Hammie]

- Open the Logitech Harmony Remote Software on your computer
- Click on the Activities Tab (if not already selected)
- On the 'Watch TV' Activity, select 'Settings'
- Click on the 'Review the settings for this Activity'
- Check to see what the setting is for your TV. Is the setting for Channel 3 or 4?
- If the setting is for Channel 3, not sure what the issue is. If the setting is for Channel 4, select the 'No' radio button and click 'Next'
- Click 'Next' maybe 4 times (until you get to the 'input or channel' screen for the TV).
- Select the correct channel and complete the process.

This should work for what you need to fix.

[Genocide316]

This is what it says for "Review the settings for this Activity"

Device Status / Actions
Panasonic TV Panasonic TV is on
Onkyo AV Receiver-Room 1 Onkyo AV Receiver-Room 1 is on
Other All other devices are off
Panasonic TV Panasonic TV is set to "TV"
Onkyo AV Receiver-Room 1 Onkyo AV Receiver-Room 1 is set to "Game/TV"

There is nothing about the Channel that I see. Unless of course i'm looking in the wrong place?

[Genocide316]

Come to think of it i'm moving in like a week and a half and I'm getting a different Cable Box...I'm going to worry about this when I move in...Thanks for all of your help guys! If I can't figure this out when I move in i'll post again.