onkyo 605 question - Blu-ray Forum

mercury187 · 10-23-2007, 07:35 PM

I was thinking about getting the onkyo 605, would it be possible to input to the onkyo at 1080p via component cables and have it output through hdmi to the tv?

Memnoch · 10-23-2007, 07:58 PM

I have my Wii at 480P going into my 605 via component and out to the TV via HDMI. I don't have anything 1080P going in via component then out via HDMI, but it would probably work just fine.

mercury187 · 10-23-2007, 08:28 PM

sweet, are there any special settings you needed for that???? My tv only goes up to 1080i via component so if i can get 1080p using the receiver that would be perfect!!

Amon37 · 10-23-2007, 08:34 PM

It should be what comes is will go out. You will have to check the manual to be sure.

With my Denon I have 1080i through component going out of the HDMI port to the TV.

SpikesBluBlooded · 10-23-2007, 08:39 PM

Quote:

Originally Posted by mercury187

sweet, are there any special settings you needed for that???? My tv only goes up to 1080i via component so if i can get 1080p using the receiver that would be perfect!!

Sorry, but you can't get 1080p out unless you have all the way through. The most you're going to get is 1080i (not that there's anything wrong with that), that's the limitation of your TV. I wouldn't be too disappointed, I really don't think you're going to be able to tell the difference unless your TV is about 60" and up...

love blu or go home! · 10-23-2007, 08:40 PM

No the 605 and the 705 don't upscale to 1080P via component to HDMI.

SpikesBluBlooded · 10-23-2007, 08:40 PM

Just read your sig line. You state that your TV is 1080p, but you're talking about it only having 1080i. I'm confused, would you mind clarifying?

SpikesBluBlooded · 10-23-2007, 08:42 PM

Quote:

Originally Posted by love blu or go home!

No the 605 and the 705 don't upscale to 1080P via component to HDMI.

That's the other aspect of the equation. You have to use HDMI from start to finish, and have a 1080p Blu-ray player hooked through a 1080p supportive receiver to a 1080p TV. Hope that straightens things out...

Amon37 · 10-23-2007, 08:43 PM

He's saying only 1080i through component on the TV but 1080p through HDMI. So he wants to send 1080p through component to the receiver and have the receiver send that signal through the HDMI port on the receiver to the HDMI port on the TV so he can get 1080p on the TV>

love blu or go home! · 10-23-2007, 08:44 PM

Quote:

Originally Posted by SpikesBluBlooded

Just read your sig line. You state that your TV is 1080p, but you're talking about it only having 1080i. I'm confused, would you mind clarifying?

It doesn't matter.... the Onkyo TX-SR875 and higher are the only ones that upconversion to 1080p from component...

love blu or go home! · 10-23-2007, 08:45 PM

Quote:

Originally Posted by Amon37

He's saying only 1080i through component on the TV but 1080p through HDMI. So he wants to send 1080p through component to the receiver and have the receiver send that signal through the HDMI port on the receiver to the HDMI port on the TV so he can get 1080p on the TV>

And the answer is no. the 605, 705, and 805 can't to this....

SpikesBluBlooded · 10-23-2007, 08:45 PM

Quote:

Originally Posted by Amon37

He's saying only 1080i through component on the TV but 1080p through HDMI. So he wants to send 1080p through component to the receiver and have the receiver send that signal through the HDMI port on the receiver to the HDMI port on the TV so he can get 1080p on the TV>

aHHH, gotcha. but...

Quote:

Originally Posted by love blu or go home!

It doesn't matter.... the Onkyo TX-SR875 and higher are the only ones that upconversion to 1080p from component...

So the answer would be "no"...

love blu or go home! · 10-23-2007, 08:46 PM

Quote:

Originally Posted by SpikesBluBlooded

aHHH, gotcha. but...

So the answer would be "no"...

now you got it.. LOL

MacDaddyOJack · 10-23-2007, 08:47 PM

The Onkyo 605 will only "touch" or convert the signal if it is input as one type of signal (component) and output as another (HDMI). So if you input as component and output as component, then the Onkyo 605 should not change the signal. However, I have not heard of any device being able to output 1080p over a component cable. What player/ device are you using and are you sure that it is output in 1080p??

love blu or go home! · 10-23-2007, 08:51 PM

Quote:

Originally Posted by MacDaddyOJack

The Onkyo 605 will only "touch" or convert the signal if it is input as one type of signal (component) and output as another (HDMI). So if you input as component and output as component, then the Onkyo 605 should not change the signal. However, I have not heard of any device being able to output 1080p over a component cable. What player/ device are you using and are you sure that it is output in 1080p??

He is not talking about outputting to component. He wanted to output to HDMI the input was component.

SpikesBluBlooded · 10-23-2007, 08:52 PM

Well both input and output must be HDMI...

SpikesBluBlooded · 10-23-2007, 08:58 PM

By the way, I just checked out Vanns.com's website, and the Onkyo 605 does support 1080p. So, if you use HDMI start to finish, and your Blu and TV are both 1080p, then you should be all set... http://www.vanns.com/shop/servlet/it...ures/538500464

love blu or go home! · 10-23-2007, 09:02 PM

Quote:

Originally Posted by SpikesBluBlooded

By the way, I just checked out Vanns.com's website, and the Onkyo 605 does support 1080p. So, if you use HDMI start to finish, and your Blu and TV are both 1080p, then you should be all set... http://www.vanns.com/shop/servlet/it...ures/538500464

Yes HDMI to HDMI 1080P no problem. All I said was if you hookup your Wii to component it won't out put 1080P to HDMI.

Bruuce · 10-23-2007, 09:09 PM

HDMI to HDMI will result in whatever your TV can support and the source resolution.

Component to component will result in 1080i max and whatever your source is.

Component to HDMI will result in 720p.

mercury187 · 10-23-2007, 09:16 PM

my tv will only do 1080p via hdmi, some stupid sony restriction I overlooked before buying the tv. I really dont feel like buying another 360 just for an hdmi port, rather spend the money on a ps3 so i can watch blu movies.

10-23-2007, 07:35 PM	#1
mercury187 Member Member since:Oct 2007	onkyo 605 question I was thinking about getting the onkyo 605, would it be possible to input to the onkyo at 1080p via component cables and have it output through hdmi to the tv? Last edited by mercury187; 10-23-2007 at 07:56 PM.

Similar Threads
thread	Forum	Thread Starter	Replies	Last Post
Onkyo 605 price question	Receivers	tlinnert	16	11-12-2008 11:52 PM
Onkyo 605 Price Question	Receivers	BPHusker	11	06-28-2008 06:39 PM
Question About The Onkyo 605	Receivers	Croweyes1121	7	05-22-2008 01:41 PM
Quick Onkyo 605 question	Receivers	drb124	1	04-13-2008 01:15 AM
Onkyo 605 Question	Blu-ray Technology and Future Technology	CRMA	16	02-01-2008 12:41 PM

10-23-2007, 07:58 PM	#2
Memnoch Expert Member Member since:Jun 2007 Location:Northern VA 4K collection:185 Blu-ray collection:185 Trading Score:1	I have my Wii at 480P going into my 605 via component and out to the TV via HDMI. I don't have anything 1080P going in via component then out via HDMI, but it would probably work just fine.

10-23-2007, 08:28 PM	#3
mercury187 Member Member since:Oct 2007	sweet, are there any special settings you needed for that???? My tv only goes up to 1080i via component so if i can get 1080p using the receiver that would be perfect!!

10-23-2007, 08:34 PM	#4
Amon37 Power Member Member since:Jan 2007 Location:USA,Arizona PSNetwork: Amon37	It should be what comes is will go out. You will have to check the manual to be sure. With my Denon I have 1080i through component going out of the HDMI port to the TV.

10-23-2007, 08:40 PM	#6
love blu or go home! Active Member Member since:Oct 2007 Location:NYC, New York Trading Score:3	No the 605 and the 705 don't upscale to 1080P via component to HDMI.

10-23-2007, 08:40 PM	#7
SpikesBluBlooded Special Member Member since:Sep 2007 Location:Orlando, FL Blu-ray collection:719 Trading Score:1	Just read your sig line. You state that your TV is 1080p, but you're talking about it only having 1080i. I'm confused, would you mind clarifying?

10-23-2007, 08:43 PM	#9
Amon37 Power Member Member since:Jan 2007 Location:USA,Arizona PSNetwork: Amon37	He's saying only 1080i through component on the TV but 1080p through HDMI. So he wants to send 1080p through component to the receiver and have the receiver send that signal through the HDMI port on the receiver to the HDMI port on the TV so he can get 1080p on the TV>

10-23-2007, 08:47 PM	#14
MacDaddyOJack Blu-ray Guru Member since:Sep 2007 Location:Richmond, VA PSNetwork: MacDaddyOJack Trophy Level: 12(4%) Home Theater Gallery:12 Blu-ray collection:71 Blu-ray reviews:23 Trading Score:4	The Onkyo 605 will only "touch" or convert the signal if it is input as one type of signal (component) and output as another (HDMI). So if you input as component and output as component, then the Onkyo 605 should not change the signal. However, I have not heard of any device being able to output 1080p over a component cable. What player/ device are you using and are you sure that it is output in 1080p??

10-23-2007, 08:52 PM	#16
SpikesBluBlooded Special Member Member since:Sep 2007 Location:Orlando, FL Blu-ray collection:719 Trading Score:1	Well both input and output must be HDMI...

10-23-2007, 08:58 PM	#17
SpikesBluBlooded Special Member Member since:Sep 2007 Location:Orlando, FL Blu-ray collection:719 Trading Score:1	By the way, I just checked out Vanns.com's website, and the Onkyo 605 does support 1080p. So, if you use HDMI start to finish, and your Blu and TV are both 1080p, then you should be all set... http://www.vanns.com/shop/servlet/it...ures/538500464

10-23-2007, 09:09 PM	#19
Bruuce Senior Member Member since:Dec 2006	HDMI to HDMI will result in whatever your TV can support and the source resolution. Component to component will result in 1080i max and whatever your source is. Component to HDMI will result in 720p.

10-23-2007, 09:16 PM	#20
mercury187 Member Member since:Oct 2007	my tv will only do 1080p via hdmi, some stupid sony restriction I overlooked before buying the tv. I really dont feel like buying another 360 just for an hdmi port, rather spend the money on a ps3 so i can watch blu movies.

Best Blu-ray Movie Deals