Help with sound from BD-P1200 - Blu-ray Forum

malam · 10-22-2007, 12:02 AM

Whenever I have a playing movie on "Pause", when I resume playing, the sound goes out of sync. I have to stop or rewind a couple of times to have the sound in sync with the movie again. Is their a setting that I am missing?
I have the sound fed from the Samsung BD-P1200 via a toslink cable to the LG AVR . Thanks.

RUR · 10-22-2007, 01:35 AM

Yes, after months without problems, I've been having the same issue since last week's firmware update. Not every time I pause, but most times. Not unique to Toslink since I'm using HDMI. You and I should call Samsung's customer support and begin the complaint process.

malam · 10-22-2007, 08:51 PM

My unit is less that one week old and I upgraded the firmware as soon as I opened the box. Other than this problem though, I have been impressed with the player. Loading time is not too different from my regular DVD player.

clyon · 10-22-2007, 08:56 PM

This happened to me 2 days ago, this was the first time ever in the 5 months I have owned it. I left the player on pause maybe 20-30 mins (I forgot about it). I just hit the stop 1 time then play & it was fine.

Toslink used

Arr MiHardies · 10-23-2007, 02:08 AM

I have encountered this a few times, as well as various video lockups as seen in This Thread. All of which have been occuring since the last firmware update, and only seem to occur with DVDs.

RUR · 10-23-2007, 02:27 AM

I've played dozens of SD's thru the 1200 since the update with no video freezes. YMMV, of course!

Arr MiHardies · 10-24-2007, 10:33 PM

Try it with futurama Season 1 if you have it. locked up on every episode as it started scrolling the credits. Also mid-episode on a few of them.
Also, I picked up Meet the Robinsons today on BR, and the damned player kept flashing an "Angle" message up multiple time throughout the movie. it was very distracting and irrtating. Im getting the impression this firmware build wasn't very throughly tested, and was put out early due to rising customer complaints.

Tarheel72 · 10-25-2007, 01:54 PM

I have noticed this as well since the firmware update. Never noticed it before. I use the analog six channel for audio. I have noticed that if I restart the movie by hitting the pause button again, it seems to be better. If I restart by hitting play, it is more likely to happen. Usually if I hit pause again and then restart the movie it seems to correct the issue.

Obviously this is something that resulted with the firmware update and we need to make them aware of it.

malam · 10-26-2007, 09:07 PM

Quote:

Originally Posted by Tarheel72

I have noticed this as well since the firmware update. Never noticed it before. I use the analog six channel for audio. I have noticed that if I restart the movie by hitting the pause button again, it seems to be better. If I restart by hitting play, it is more likely to happen. Usually if I hit pause again and then restart the movie it seems to correct the issue.

Obviously this is something that resulted with the firmware update and we need to make them aware of it.

Yes, I found that if I hit 'PAUSE" again rather than "PLAY", I don't get the freese up. Other than this minor problem, the player is doing very well and I am very happy with it.

Tarheel72 · 10-30-2007, 01:37 AM

well, I sent samsung CS an email on the website on Thursday explaining the problem and I am still waiting for a reply. I won't hold my breath. What we need is a firmware update.

10-22-2007, 12:02 AM	#1
malam Junior Member Member since:Jun 2007 Location:Toronto, Ontario	Help with sound from BD-P1200 Whenever I have a playing movie on "Pause", when I resume playing, the sound goes out of sync. I have to stop or rewind a couple of times to have the sound in sync with the movie again. Is their a setting that I am missing? I have the sound fed from the Samsung BD-P1200 via a toslink cable to the LG AVR . Thanks.

Similar Threads
thread	Forum	Thread Starter	Replies	Last Post
Bd-P1200 Firmware help	Blu-ray Players and Recorders	Smadawho	5	02-01-2009 12:45 AM
BD-P1200 weirdness	Blu-ray Players and Recorders	itsfatboy	27	11-28-2007 03:15 AM
BD-P1200 -- No rear or LFE sound?	Blu-ray Players and Recorders	paulsen	6	08-03-2007 10:43 PM
Bd-p1200 setting	Blu-ray Players and Recorders	memorex	1	06-01-2007 09:30 PM
Samsung BD-P1200	Blu-ray Players and Recorders	Forresttheman	0	05-07-2007 03:44 AM

10-22-2007, 01:35 AM	#2
RUR Blu-ray Guru Member since:Feb 2007 Location:Abiit, excessit, evasit, erupit Blu-ray collection:143 Trading Score:1	Yes, after months without problems, I've been having the same issue since last week's firmware update. Not every time I pause, but most times. Not unique to Toslink since I'm using HDMI. You and I should call Samsung's customer support and begin the complaint process.

10-22-2007, 08:51 PM	#3
malam Junior Member Member since:Jun 2007 Location:Toronto, Ontario	My unit is less that one week old and I upgraded the firmware as soon as I opened the box. Other than this problem though, I have been impressed with the player. Loading time is not too different from my regular DVD player.

10-22-2007, 08:56 PM	#4
clyon Special Member Member since:Feb 2007 Location:Just left of the Alpha Quadrant 4K collection:57 Blu-ray collection:824 Blu-ray reviews:8	This happened to me 2 days ago, this was the first time ever in the 5 months I have owned it. I left the player on pause maybe 20-30 mins (I forgot about it). I just hit the stop 1 time then play & it was fine. Toslink used

10-23-2007, 02:08 AM	#5
Arr MiHardies Active Member Member since:Aug 2007 Blu-ray collection:1 Blu-ray reviews:1	I have encountered this a few times, as well as various video lockups as seen in This Thread. All of which have been occuring since the last firmware update, and only seem to occur with DVDs.

10-23-2007, 02:27 AM	#6
RUR Blu-ray Guru Member since:Feb 2007 Location:Abiit, excessit, evasit, erupit Blu-ray collection:143 Trading Score:1	I've played dozens of SD's thru the 1200 since the update with no video freezes. YMMV, of course!

10-24-2007, 10:33 PM	#7
Arr MiHardies Active Member Member since:Aug 2007 Blu-ray collection:1 Blu-ray reviews:1	Try it with futurama Season 1 if you have it. locked up on every episode as it started scrolling the credits. Also mid-episode on a few of them. Also, I picked up Meet the Robinsons today on BR, and the damned player kept flashing an "Angle" message up multiple time throughout the movie. it was very distracting and irrtating. Im getting the impression this firmware build wasn't very throughly tested, and was put out early due to rising customer complaints.

10-25-2007, 01:54 PM	#8
Tarheel72 Member Member since:Oct 2007 Blu-ray reviews:1	I have noticed this as well since the firmware update. Never noticed it before. I use the analog six channel for audio. I have noticed that if I restart the movie by hitting the pause button again, it seems to be better. If I restart by hitting play, it is more likely to happen. Usually if I hit pause again and then restart the movie it seems to correct the issue. Obviously this is something that resulted with the firmware update and we need to make them aware of it.

10-30-2007, 01:37 AM	#10
Tarheel72 Member Member since:Oct 2007 Blu-ray reviews:1	well, I sent samsung CS an email on the website on Thursday explaining the problem and I am still waiting for a reply. I won't hold my breath. What we need is a firmware update.

Best Blu-ray Movie Deals