Onkyo 605 & Panasonic BD30K - Blu-ray Forum

jcook9196 · 11-03-2008, 02:18 PM

I was wondering if anyone could help me out. I have a Panasonic DMP-BD30K and a Onkyo 605 receiver. I have the blu-ray connected to the receiver via HDMI and then the receiver connected to the TV via HDMI and I noticed when watching movies with TrueHD I don't see it on the receiver display (i.e. ironman and 5th element remastered). This is really making me upset, any ideas?

scweb13 · 11-03-2008, 02:57 PM

Do you have the Panny set to bitstream for the audio output?

jcook9196 · 11-03-2008, 03:05 PM

Yes, set to bitstream and secondary audio is off. What should I do, someone mentioned to take the HDMI audio off on the receiver???

CJS234 · 11-03-2008, 03:51 PM

have you checked your onkyo settings you have to have it set to direct or something similar for the hdmi input youre using for the player. I have the same setup and it works fine for me. hope this helps pm me if you need instructions

CJS234

DBlackGT · 11-03-2008, 04:04 PM

Yes, make sure the "HDMI audio out" setting is off on the Onkyo.

chasarms · 11-04-2008, 03:21 PM

I have the 705, but I think they are similar in this instance.

You need to make sure the listening modes are mapped correctly. In the Onkyo setup menue, select listening modes. You can then assign a listening mode to the various possible input types.

If you want the receiver to light the TrueHD display, you'll have to assign the TrueHD input type to TrueHD output type. It is pretty easily to do, but you will have to do it for each device. BD player, cable/sat box, etc.

jcook9196 · 11-04-2008, 03:25 PM

Thanks all,
All I had to do was turn HDMI audio off and then set it back to auto after it kicked back in. Thank you again. Problem solved!

SDBlu · 11-04-2008, 03:29 PM

Quote:

Originally Posted by jcook9196

Thanks all,
All I had to do was turn HDMI audio off and then set it back to auto after it kicked back in. Thank you again. Problem solved!

Is the TrueHD displayed on your receiver now??

jcook9196 · 11-04-2008, 03:34 PM

Yes, infact, I put Iron Man on and TrueHD did display and sounded better now, and I put in The Incredible Hulk and DTS Master Audio displayed.

crackinhedz · 11-04-2008, 04:05 PM

make sure you turn off any Dynamic Range control in the BD player and disable the Night Mode/DRC in the Receiver.

11-03-2008, 02:18 PM	#1
jcook9196 Member Member since:Aug 2008 Home Theater Gallery:40 Blu-ray collection:300	Onkyo 605 & Panasonic BD30K I was wondering if anyone could help me out. I have a Panasonic DMP-BD30K and a Onkyo 605 receiver. I have the blu-ray connected to the receiver via HDMI and then the receiver connected to the TV via HDMI and I noticed when watching movies with TrueHD I don't see it on the receiver display (i.e. ironman and 5th element remastered). This is really making me upset, any ideas?

Similar Threads
thread	Forum	Thread Starter	Replies	Last Post
Panasonic G10 & Onkyo 605 INPUT syncing	Home Theater General Discussion	DIGITALBATH	1	03-15-2010 03:20 AM
Do I Have This All Set Up Right: Panasonic '10A to Onkyo '605...?	Receivers	ClinicaTerra LTD	22	06-30-2008 10:02 AM
Onkyo 605 + Panasonic BD30 setup help	Receivers	Buonarroti	2	05-17-2008 01:30 AM
onkyo 605 reciever, amp?	Home Theater General Discussion	slooby	6	04-28-2008 07:41 PM

11-03-2008, 02:57 PM	#2
scweb13 Blu-ray Guru Member since:Nov 2007 Location:Everett, WA 4K collection:1 Blu-ray collection:512 DVD collection:29 Trading Score:4	Do you have the Panny set to bitstream for the audio output?

11-03-2008, 03:05 PM	#3
jcook9196 Member Member since:Aug 2008 Home Theater Gallery:40 Blu-ray collection:300	Yes, set to bitstream and secondary audio is off. What should I do, someone mentioned to take the HDMI audio off on the receiver???

11-03-2008, 03:51 PM	#4
CJS234 Hot Deals moderator Top contributor Member since:Mar 2007 Location:Duluth, MN Home Theater Gallery:51 4K collection:14 Blu-ray collection:1108 Digital collection:2 Blu-ray reviews:6 Trading Score:26	have you checked your onkyo settings you have to have it set to direct or something similar for the hdmi input youre using for the player. I have the same setup and it works fine for me. hope this helps pm me if you need instructions CJS234

11-03-2008, 04:04 PM	#5
DBlackGT Expert Member Top contributor Member since:Jan 2008 Location:Scottsdale, AZ Home Theater Gallery:34 Blu-ray collection:58	Yes, make sure the "HDMI audio out" setting is off on the Onkyo.

11-04-2008, 03:21 PM	#6
chasarms Active Member Member since:Feb 2008 Location:St. Louis Blu-ray reviews: 1	I have the 705, but I think they are similar in this instance. You need to make sure the listening modes are mapped correctly. In the Onkyo setup menue, select listening modes. You can then assign a listening mode to the various possible input types. If you want the receiver to light the TrueHD display, you'll have to assign the TrueHD input type to TrueHD output type. It is pretty easily to do, but you will have to do it for each device. BD player, cable/sat box, etc.

11-04-2008, 03:25 PM	#7
jcook9196 Member Member since:Aug 2008 Home Theater Gallery:40 Blu-ray collection:300	Thanks all, All I had to do was turn HDMI audio off and then set it back to auto after it kicked back in. Thank you again. Problem solved!

11-04-2008, 03:34 PM	#9
jcook9196 Member Member since:Aug 2008 Home Theater Gallery:40 Blu-ray collection:300	Yes, infact, I put Iron Man on and TrueHD did display and sounded better now, and I put in The Incredible Hulk and DTS Master Audio displayed.

11-04-2008, 04:05 PM	#10
crackinhedz Super Moderator Member since:Feb 2007 Home Theater Gallery:10 Blu-ray reviews:8 Trading Score:19	make sure you turn off any Dynamic Range control in the BD player and disable the Night Mode/DRC in the Receiver.

Best Blu-ray Movie Deals