DTS-HD dont work

[arsenal]

hi every one
i down load the last ubdate for my ps3 (2.3) and i buy pioneer reciever lx-70
to enjoy the dts-hd and the true-hd but im surprised that the reciever show me only pcm on the screen .
i tried every thing but no result .
the problem is when i press the select on the ps3 joystic i see dts-hd on the upper bar even the the true hd but on the reciever screen it show me only pcm . im very confused . my connection are all right.
any have the same problem ?
i borrow my friend blue ray player and every thing works good with the reciever i get the dts-hd and true-hd but when connect my ps3 i get only pcm.
can any one help please.
thanks every one.

[Ascended_Saiyan]

Your DTS-HD is working properly. The fact that you saw DTS-HD on your PS3 tells you that. The PS3 transcodes that signal into LPCM for your receiver. That's all. Enjoy DTS-HD (HR and MA)! Everything is fine.

[arsenal]

Originally Posted by Ascended_Saiyan

Your DTS-HD is working properly. The fact that you saw DTS-HD on your PS3 tells you that. The PS3 transcodes that signal into LPCM for your receiver. That's all. Enjoy DTS-HD (HR and MA)! Everything is fine.

Thanks For Your Replay My Friend.
But The Sound Is Different .the Dts-hd And The True -hd Is More Powerful On The Blue Ray Player Than The Ps3 .
Second Thing There Is True -hd Logo On The Ps3 Box So Why It Is Dont Show On The Reciever Screen.
And Why Did Sony Make The 2.3 Update If The Sound Is Going To Decod In To Pcm.
Thanks

[RUR]

Originally Posted by arsenal

Thanks For Your Replay My Friend.
But The Sound Is Different .the Dts-hd And The True -hd Is More Powerful On The Blue Ray Player Than The Ps3 .

If you level-matched (adjusted the volume to be the same with both players), it would sound identical.

Second Thing There Is True -hd Logo On The Ps3 Box So Why It Is Dont Show On The Reciever Screen.

The receiver will only show the DTS HD MA/TrueHD logos when the receiver is decoding. Since the PS 3 does the actual decoding and sends the resultant MPCM stream to the receiver, the receiver will only show PCM or multistream or something similar.

And Why Did Sony Make The 2.3 Update If The Sound Is Going To Decod In To Pcm.

Because the PS3 has hardware limitations which prevent it from bitstreaming the advanced codecs for decode in the receiver. It can only decode in the player. In the end, it doesn't matter. Other than the fact that your receiver isn't lighting up, the sound is exactly the same.

Edit: See this thread for the detailed answers to your questions: https://forum.blu-ray.com/showthread.php?t=40872