will my reciever work with DTS MA - Blu-ray Forum

1lakerfan · 04-10-2008, 04:44 PM

I have the Denon 2807 reciever hooked up to hdmi and am able to PCM 5.1/ 7.1. I heard it gets sent as pcm right?

DutchBoy · 04-10-2008, 04:46 PM

Quote:

Originally Posted by 1lakerfan

I have the Denon 2807 reciever hooked up to hdmi and am able to PCM 5.1/ 7.1. I heard it gets sent as pcm right?

If you're talking about the PS3 and it sending the advanced codecs, then yes, it sends them via PCM.

edit: ah, just noted it was in the PS3 thread. Sorry about that. Yes, again, sends it PCM-style.

Amon37 · 04-10-2008, 04:49 PM

Yes, just like True HD the DTS-MA and HR will be decoded to PCM and sent to the receiver.

Icemage · 04-10-2008, 04:50 PM

Quote:

Originally Posted by 1lakerfan

I have the Denon 2807 reciever hooked up to hdmi and am able to PCM 5.1/ 7.1. I heard it gets sent as pcm right?

In the coming firmware 2.30 update, assuming your player is a PS3, it will internally decode DTS-HD MA into PCM. Your receiver won't know any different; it'll still see the same PCM stream over HDMI that it's always seen, so if that is indeed yourself, you are good to go.

jkwest · 04-10-2008, 05:28 PM

if you have a Onkyo, the display on your receiver will still say Multi Chan In, but, if you push the green triangle(display button) on PS3 controller or remote then in the upper left of the screen it will say DTS MD HD...ohmygawd, I can't wait to see that!!!

1lakerfan · 04-10-2008, 11:42 PM

I have bought I am legend on blu ray and it only has dolby true hd and regular dolby digital. When I push select it shows dolby 5.1. shouldnt automatically go to the dolby true hd? (dont know where to go to change sound format on i am legend) or say multi channel in on the ps3 when I push select.

Shin-Ra · 04-10-2008, 11:44 PM

It's under Languages.

If you have the Blu-ray remote you can just hit the Audio button to cycle through.

1lakerfan · 04-10-2008, 11:53 PM

I checked their and didnt see it

jkwest · 04-10-2008, 11:59 PM

Its there...one must look harder..

1lakerfan · 04-11-2008, 12:04 AM

When I hit select and see that it just says dolby 5.1 its not in the hd format right?

JAGUAR1977 · 04-11-2008, 12:20 AM

Quote:

Originally Posted by 1lakerfan

When I hit select and see that it just says dolby 5.1 its not in the hd format right?

Change your PS3's output to PCM, not bitstream.

When you select TrueHD it will be converted to 5.1 PCM.

ATM, it sounds like you are bitstreaming the regular 5.1 audio track.

dukenukem · 04-11-2008, 12:44 AM

You can use the ps3 controller,hit select,then triangle and look for the audio option,it will let you change the audio.

04-10-2008, 04:44 PM	#1
1lakerfan Active Member Member since:May 2007	will my reciever work with DTS MA I have the Denon 2807 reciever hooked up to hdmi and am able to PCM 5.1/ 7.1. I heard it gets sent as pcm right?

Similar Threads
thread	Forum	Thread Starter	Replies	Last Post
PS3 doesnt need DTS HD MA OR TRUE HD reciever? SO what should i get instead?	Receivers	Blu Haze	52	03-04-2010 07:57 AM
cannot get dts hd to decode on my sony str-dg820 reciever	Receivers	plasticmanpat	39	04-10-2009 03:20 PM
DD:True HD & DTS:HD MA being displayed on a reciever	Blu-ray Players and Recorders	CrazyEightyNine	3	06-09-2008 08:07 PM
DTS-HD dont work	Home Theater General Discussion	arsenal	11	05-08-2008 12:00 AM
Odd Reciever Problem with DTS	Receivers	Moose1132	5	04-28-2008 09:02 AM

04-10-2008, 04:49 PM	#3
Amon37 Power Member Member since:Jan 2007 Location:USA,Arizona PSNetwork: Amon37	Yes, just like True HD the DTS-MA and HR will be decoded to PCM and sent to the receiver.

04-10-2008, 05:28 PM	#5
jkwest Off-Topic King Member since:Jul 2007 Location:Northern California PSN Id: jkwest5 Blu-ray reviews:1 Trading Score:20	if you have a Onkyo, the display on your receiver will still say Multi Chan In, but, if you push the green triangle(display button) on PS3 controller or remote then in the upper left of the screen it will say DTS MD HD...ohmygawd, I can't wait to see that!!!

04-10-2008, 11:42 PM	#6
1lakerfan Active Member Member since:May 2007	I have bought I am legend on blu ray and it only has dolby true hd and regular dolby digital. When I push select it shows dolby 5.1. shouldnt automatically go to the dolby true hd? (dont know where to go to change sound format on i am legend) or say multi channel in on the ps3 when I push select.

04-10-2008, 11:44 PM	#7
Shin-Ra Super Moderator Top contributor Member since:Feb 2007 Blu-ray collection:5 Trading Score:1	It's under Languages. If you have the Blu-ray remote you can just hit the Audio button to cycle through.

04-10-2008, 11:53 PM	#8
1lakerfan Active Member Member since:May 2007	I checked their and didnt see it

04-10-2008, 11:59 PM	#9
jkwest Off-Topic King Member since:Jul 2007 Location:Northern California PSN Id: jkwest5 Blu-ray reviews:1 Trading Score:20	Its there...one must look harder..

04-11-2008, 12:04 AM	#10
1lakerfan Active Member Member since:May 2007	When I hit select and see that it just says dolby 5.1 its not in the hd format right?

04-11-2008, 12:44 AM	#12
dukenukem Active Member Member since:Jan 2008 Home Theater Gallery:23 Blu-ray collection:31	You can use the ps3 controller,hit select,then triangle and look for the audio option,it will let you change the audio.

Best PS3 Game Deals