onkyo usa dts ma update! - Page 2 - Blu-ray Forum

un4gvn94538 · 04-11-2008, 09:58 PM

Quote:

Originally Posted by sj001

I know some kind of firmware update came out for 605, but it was supposedly older models. Mine came up as not needing the update when I checked the site.

It's BS sending it back to Onkyo, or bringing it to a dealer, they should have clear instructions on updating it, can't be that difficult.

this update isnt even listed on the onk site. the update on the onk site for the 605 doesnt include the issue with the dts ma bitstream bomb. the units for these models including the 605 that are not affected are the ones that were mfg. recently.

un4gvn94538 · 04-11-2008, 10:07 PM

Quote:

Originally Posted by Hep

Just completed the update without issue. The longest part of the process was re-doing the set-up on the receiver since the update clears all user defined settings, including the Audyssey speaker config. In any case, the update was a success.

that explains why icon disappeared. oh well. not a big deal.

aqupunk · 04-11-2008, 10:14 PM

Quote:

Originally Posted by un4gvn94538

this update isnt even listed on the onk site. the update on the onk site for the 605 doesnt include the issue with the dts ma bitstream bomb. the units for these models including the 605 that are not affected are the ones that were mfg. recently.

I am getting my 805 tuesday do you think mine was affected by the bitstream bomb? Would it already have the new firmware or is it to new?

I do bitstream out with the panny bd30...

un4gvn94538 · 04-11-2008, 10:32 PM

Quote:

Originally Posted by aqupunk

I am getting my 805 tuesday do you think mine was affected by the bitstream bomb? Would it already have the new firmware or is it to new?

I do bitstream out with the panny bd30...

probably not affected but when you get it, register online and then check the instructions. it will tell you how to see the dsp versions and what its suppose to be after the update.

saprano · 04-11-2008, 10:46 PM

is the problem with all 705's? ill be using the ps3 for dts-ma(im also tired of typing dts-hdma bsteck so no more of that or caps from me ether) so i dont have to worry but just wondering.

aygie · 04-11-2008, 10:48 PM

Guys just to be clear this is only a DSP update (Digital Signal Processor), there is actually another firmware update which can only be done through the RS 232 port, you can buy USB to RS 232 connectors.

You need to have the DSP update before you can do the Firmware update.

GreenMotion · 04-11-2008, 10:50 PM

Interesting. I don't see a link to the 805 firmware update anywhere. Any idea where I can find the latest firmware version?

rigsgoneblu · 04-11-2008, 10:58 PM

Question, when I went to Onkyo and put in my info it said I did not need the firmware update. My 605 is very new. But someone said this was not even on the site so do all 605's need this update to avoid the POP from bitstreamed DTS MA? Sorry if this was already posted I couldn't find it

Thanks

Rigs

aygie · 04-11-2008, 11:01 PM

Quote:

Originally Posted by GreenMotion

Interesting. I don't see a link to the 805 firmware update anywhere. Any idea where I can find the latest firmware version?

DSP or Firmaware? the 805 Firmware is out yet but the others are, have a look here http://www.avsforum.com/avs-vb/showthread.php?t=1016297

aygie · 04-11-2008, 11:02 PM

Quote:

Originally Posted by rigsgoneblu

Question, when I went to Onkyo and put in my info it said I did not need the firmware update. My 605 is very new. But someone said this was not even on the site so do all 605's need this update to avoid the POP from bitstreamed DTS MA? Sorry if this was already posted I couldn't find it

Thanks

Rigs

There are reports of the firmware being pre-installed on newer models.

SDon1969 · 04-11-2008, 11:05 PM

Quote:

Originally Posted by un4gvn94538

dont think this update covers the 605. its not listed anywhere.

Ah yeah right on, thanks man.

un4gvn94538 · 04-11-2008, 11:14 PM

Quote:

Originally Posted by Aygie

Guys just to be clear this is only a DSP update (Digital Signal Processor), there is actually another firmware update which can only be done through the RS 232 port, you can buy USB to RS 232 connectors.

You need to have the DSP update before you can do the Firmware update.

there is only an firmware update for the 805 correct?

edit: checked out the link you provided and it doesnt list one for the 705

GreenMotion · 04-11-2008, 11:26 PM

Quote:

Originally Posted by un4gvn94538

there is only an firmware update for the 805 correct?

edit: checked out the link you provided and it doesnt list one for the 705

Actually, I do NOT see a firmware update for the 805 ...

un4gvn94538 · 04-11-2008, 11:28 PM

Quote:

Originally Posted by GreenMotion

Actually, I do NOT see a firmware update for the 805 ...

didnt either and think he said that he was waiting for one on another thread. im pretty content with the ps3 update and the dsp update that addresses the issue. good week

Kuraudo · 05-08-2008, 03:37 PM

Quote:

Originally Posted by un4gvn94538

havent checked the link yet. wanted to get the word out but its probably like the european update.... burn it on a disc and update with a cd player with a optical out. or take it in.

Will a PS3 work? I don't have a separate cd player but I'm thinking about getting this ONKYO.

JimSD · 05-08-2008, 04:10 PM

Quote:

Originally Posted by Kuraudo

Will a PS3 work? I don't have a separate cd player but I'm thinking about getting this ONKYO.

Yes, I used the PS3 to do the DSP update on our Onkyo 705.

Hep · 05-08-2008, 04:14 PM

Quote:

Originally Posted by Kuraudo

Will a PS3 work? I don't have a separate cd player but I'm thinking about getting this ONKYO.

I did the update a couple of weeks ago without issue. I did not use my PS3 for the update since I already had a CD changer hooked up via optical. I would surmise that if you played the update from your PS3 through the optical out to the appropriate input, it should work just fine. Having said that, it sure would be nice to know if anyone has been successful with that approach. For the money, you won't be disapointed with the sound of an Onkyo if you decide to go that way. Good luck.

SkullPhyre · 05-12-2008, 09:43 PM

I love my Onkyo 875 I did the update a few weeks ago with my PS3. Very easy.

Here are the settings.
BD Setting: Optical : bitstream
Music Settings: Crossfade Playback

ff
Audio CD Output Freq:44.1
Bitmaping

ff
Sound Settings:
Audio Output Settings:Linear PCM 2 ch 44.1khz and 48khz checked

You can change them back to what you had before after you complete the DSP update

un4gvn94538 · 05-12-2008, 09:53 PM

Quote:

Originally Posted by SkullPhyre

I love my Onkyo 875 I did the update a few weeks ago with my PS3. Very easy.

Here are the settings.
BD Setting: Optical : bitstream
Music Settings: Crossfade Playback

ff
Audio CD Output Freq:44.1
Bitmaping

ff
Sound Settings:
Audio Output Settings:Linear PCM 2 ch 44.1khz and 48khz checked

You can change them back to what you had before after you complete the DSP update

was the crossfade and bitmaping necessary?

SkullPhyre · 05-13-2008, 12:25 AM

I only turned on what was needed worked great then I changed them all back to what I had them at.

05-12-2008, 09:43 PM	#38
SkullPhyre Senior Member Member since:Mar 2008 Location:Portland, Oregon Blu-ray collection:184	I love my Onkyo 875 I did the update a few weeks ago with my PS3. Very easy. Here are the settings. BD Setting: Optical : bitstream Music Settings: Crossfade Playbackff Audio CD Output Freq:44.1 Bitmapingff Sound Settings: Audio Output Settings:Linear PCM 2 ch 44.1khz and 48khz checked You can change them back to what you had before after you complete the DSP update

Similar Threads
thread	Forum	Thread Starter	Replies	Last Post
First Paramount titles: DTS USA, True HD Europe!	Blu-ray Movies - International	TIMMIE	17	10-01-2009 01:26 PM
Why is DTS usually a firmware update	Blu-ray Players and Recorders	sokrman14	3	01-12-2009 10:03 PM
Questions about update 2.30 and DTS-HD MA on onkyo 606	PS3	vonzar	3	06-13-2008 10:08 PM
No DTS-HD with 2.30 update	Audio Theory and Discussion	blypi	14	06-05-2008 10:13 PM
ps3 update for DTS-MA	PS3	anders	11	05-05-2008 12:13 AM

04-11-2008, 10:46 PM	#25
saprano Blu-ray Champion Top contributor Member since:Oct 2007 Location:Bronx, New York Blu-ray collection:495 Blu-ray reviews:2 Trading Score:9	is the problem with all 705's? ill be using the ps3 for dts-ma(im also tired of typing dts-hdma bsteck so no more of that or caps from me ether) so i dont have to worry but just wondering.

04-11-2008, 10:48 PM	#26
aygie Blu-ray Ninja Member since:Jul 2007 Location:PSN Network: Aygie Blu-ray collection:99	Guys just to be clear this is only a DSP update (Digital Signal Processor), there is actually another firmware update which can only be done through the RS 232 port, you can buy USB to RS 232 connectors. You need to have the DSP update before you can do the Firmware update.

04-11-2008, 10:50 PM	#27
GreenMotion Special Member Member since:Apr 2007 4K collection:82 Blu-ray collection:1064 Trading Score:10	Interesting. I don't see a link to the 805 firmware update anywhere. Any idea where I can find the latest firmware version?

04-11-2008, 10:58 PM	#28
rigsgoneblu Member Member since:Dec 2007 Location:Chicago	Question, when I went to Onkyo and put in my info it said I did not need the firmware update. My 605 is very new. But someone said this was not even on the site so do all 605's need this update to avoid the POP from bitstreamed DTS MA? Sorry if this was already posted I couldn't find it Thanks Rigs

05-13-2008, 12:25 AM	#40
SkullPhyre Senior Member Member since:Mar 2008 Location:Portland, Oregon Blu-ray collection:184	I only turned on what was needed worked great then I changed them all back to what I had them at.

Best Blu-ray Movie Deals