Why my PS3 only show 2.0 PCM?

[BStecke]

Are you using an optical cable? Optical only supports stereo PCM.

[SkantDragon]

Make sure you're in a game or Blu-ray with surround sound when you try it. When you're just in the system menus, it plays audio as just PCM stereo.

And yes, optical can not carry surround sound in PCM. HDMI is required for that. You need to use Dolby Digital or DTS for surround sound in optical. Make sure those codecs are turned on in your PS3 configuration.

[mugupo]

Originally Posted by BStecke

Are you using an optical cable? Optical only supports stereo PCM.

yes i using optical connected to ps3. if i get a receiver, connect my optical to the receiver, i would get 5.1 pcm?

[ADRiiAN`]

Originally Posted by mugupo

yes i using optical connected to ps3. if i get a receiver, connect my optical to the receiver, i would get 5.1 pcm?

Optical can only support 2.1 PCM.

HDMI is the only thing that can support 5.1 PCM (Along with Multichannel analog, but PS3 cannot do that)

[SkantDragon]

Originally Posted by mugupo

yes i using optical connected to ps3. if i get a receiver, connect my optical to the receiver, i would get 5.1 pcm?

No. Optical can not carry 5.1 PCM no matter what you hook it up to. The link itself can not pass that much data.

I haven't quite understood your earlier post. Have you been able to get surround sound through your Z680 already or not? It should be able to play 5.1 surround in Double Digital or DTS mode.

[mugupo]

Originally Posted by SkantDragon

No. Optical can not carry 5.1 PCM no matter what you hook it up to. The link itself can not pass that much data.

I haven't quite understood your earlier post. Have you been able to get surround sound through your Z680 already or not? It should be able to play 5.1 surround in Double Digital or DTS mode.

yes it work for dolby 5.1 and dts, just not the hd one. I wonder if i using the hd receiver, could i heard hd audio or pcm 5.1 from my ps3 using the same speaker?

[GGX]

Originally Posted by mugupo

yes it work for dolby 5.1 and dts, just not the hd one. I wonder if i using the hd receiver, could i heard hd audio or pcm 5.1 from my ps3 using the same speaker?

You need HDMI to get the full 5.1 PCM track from the PS3.

[SeanMF]

The only way your going to get 5.1 pcm/dolby truehd/dts ma on your ps3 is by hdmi cable. The receiver only needs to support pcm. You will only get 2.1 pcm by optical. So as long as you use optical you will not get 5.1 or 7.1 hd audio.

[mugupo]

Originally Posted by seanfarley2

The only way your going to get 5.1 pcm/dolby truehd/dts ma on your ps3 is by hdmi cable. The receiver only needs to support pcm. You will only get 2.1 pcm by optical. So as long as you use optical you will not get 5.1 or 7.1 hd audio.

So even i put the optical though to the receiver, it will still show 2.0 in pcm? i has to use non optical right?

[WriteSimply]

Originally Posted by mugupo

I wonder if i using the hd receiver, could i heard hd audio or pcm 5.1 from my ps3 using the same speaker?

You can't. Your sound system is a system with its own amplification (power) that gives you the sound. You cannot separate your control unit from your speakers.

A receiver provides the power for your speaker and it is a separate functional from your speakers. To get HD audio, you need new 5.1 speakers (not home-theater-in-a-box setup) and a new HDMI receiver.


fuad