Recording Records In My Situation

[CasualKiller]

You need an external phono pre amp, hopefully you have one. You'll need an audio card with analog inputs or if you are without you need an rca to 3.5mm cable. Analog inputs would be the best in my opinion. After that just connect and rip, the ripping program deals with the encoding, can do everything from MP3 to FLAC, 8 bit to 24 bit, 44khz to 192 khz.

Khz being the amount of samples per second the program takes of the source material, ie 192 khz = 192,000 samples per second, 44 khz = 44,000 samples per second.

So obviously the higher sample rate = more quality but it also means larger files...

[Damage Inc.]

Originally Posted by CasualKiller

You need an external phono pre amp, hopefully you have one.

Hm, that would also be in the receiver?
Because it does have a specific turntable-input and all.
But otherwise I'm not sure if I have one.
If it's usually like a whole special separate device, I do not have one.

You'll need an audio card with analog inputs or if you are without you need an rca to 3.5mm cable. Analog inputs would be the best in my opinion.

The audio-card pretty much has the same thing as any motherboard with audio-features.
So like speaker-connections, but then mic-in, line-in, etc.
I guess I'd use the line-in?...

After that just connect and rip, the ripping program deals with the encoding...

Rip... you mean I have to record "manually", right? Cause I doubt it would go automatically like with CDs.
I thought I'd put a program on "record" and playback the record.
Then cut each track or a single track, you know...

[CasualKiller]

Yeah you would connect to line input, not sure how to do it without a phono pre amp, you might be able to if you have pre outs on your amp but I'm really not sure.

And as for play back yeah it would be all manual, start record, start program, stop, cut, paste when done, very labor intensive.

[Johnny Vinyl]

Have a look at this

I've been using this one for years by the same company.

It could be the same offering. The supplied software from CSB Software (out of Australia) actually works quite well. However, if you are going to use it on a regular basis and are serious are transferring your LP's I suggest upgrading to the full version.

John

[Damage Inc.]

Originally Posted by CasualKiller

Yeah you would connect to line input, not sure how to do it without a phono pre amp, you might be able to if you have pre outs on your amp but I'm really not sure.

I have pre-outs, I think one of them is connected to my subwoofer (for the "home-theater") because it's active.
Unless that's not the type you mean.

And as for play back yeah it would be all manual, start record, start program, stop, cut, paste when done, very labor intensive.

Hm, that's OK, I'm a musician, so I'm used to it. :P
I might get an exercise running from one end of the room to the other though.
With the record-player and the computer being at opposite ends. XD
Good practice...

Originally Posted by John72953

Have a look at this

I've been using this one for years by the same company.

It could be the same offering. The supplied software from CSB Software (out of Australia) actually works quite well. However, if you are going to use it on a regular basis and are serious are transferring your LP's I suggest upgrading to the full version.

John

Oh man, I just found that my father had one of those things lying around.
Except it's by a brand called Zolid and a little cheaper.
I think that brand is a daughter-thing of Philips though.
As a TV-card I had was also a Zolid, but the software mentioned Philips...
Then again, the TV-card was quite crappy to be honest, so I don't know.
They seem to be kind of dumbed-down products but I'll have a look at this one.

This one is actually called a "CD Maker".
So I don't know if it's only meant to create CDs with it or anything.
And also if it's perhaps limited to the provided software or anything silly like that.
It does mention you can record records and cassettes and all though.
Also you can "put your audio into formats" and easy recording, etc...

Anyone know if it would be any good?

[Johnny Vinyl]

I've not heard of it myself, but hook it up and try it out. Maybe you'll get lucky and it ends up working beautifully for you. You've got nothing to lose.

John

[Damage Inc.]

Originally Posted by John72953

I've not heard of it myself, but hook it up and try it out. Maybe you'll get lucky and it ends up working beautifully for you. You've got nothing to lose.

John

Alright, I'll see if I can connect it today.
Also if the cables are long enough, hopefully...