XLR Cables - Blu-ray Forum

FreddieFerric · 08-10-2009, 01:02 AM

Quote:

Originally Posted by PhooNami

I'll be hooking up a Marantz AV8003 preamp to a Rotel RMB 1095 amp going into B&W CMC/9/CDM7 se's.

Take a look at these: http://cgi.ebay.com/XLR-Balanced-Pur...4.c0.m14.l1262

I have bought two pair of the solid core RCA IC's and a sweet pair of silver 4x4 bi-wire speaker cables from this seller. He's a top notch ebay seller. Product quality is outstanding. Personally, I have found my purchases from Kevin to be first rate values. I have to give props to Rich for turning me on to this seller.

Be aware, he ships from Taiwan. Normally this has been no problem, but I hear that they have been hit by a typhoon this weekend. If you email him before hand he can tell you what the deal is with that.

PhooNami · 08-21-2009, 05:16 AM

Quote:

Originally Posted by BluRayFred

Take a look at these: http://cgi.ebay.com/XLR-Balanced-Pur...4.c0.m14.l1262

I have bought two pair of the solid core RCA IC's and a sweet pair of silver 4x4 bi-wire speaker cables from this seller. He's a top notch ebay seller. Product quality is outstanding. Personally, I have found my purchases from Kevin to be first rate values. I have to give props to Rich for turning me on to this seller.

Be aware, he ships from Taiwan. Normally this has been no problem, but I hear that they have been hit by a typhoon this weekend. If you email him before hand he can tell you what the deal is with that.

$140 bucks each?

I'm really looking for a reasonably priced,bang for the buck cables. So no one uses monoprice XLR cables?

ANIMO, nope I'm not good with a soldering iron, I wish I was though as it would make my choice easier.

naturephoto1 · 08-21-2009, 05:42 AM

Quote:

Originally Posted by PhooNami

$140 bucks each?

I'm really looking for a reasonably priced,bang for the buck cables. So no one uses monoprice XLR cables?

ANIMO, nope I'm not good with a soldering iron, I wish I was though as it would make my choice easier.

Do what you want for your cables. Many swear by Monoprice. However, do you want to use a $7.00 pair of cables between a $2,600 Pre/Pro and a $2,000 amp or use something better?

Rich

Sussudio · 08-21-2009, 05:54 AM

MusiciansFriend.com is a great place to buy audio cables from...I used them for years for my home recording setup and never had a problem

hoogoosedmoose41 · 08-21-2009, 07:09 AM

I used Beldon XLR cables between my integra prepro and Rotel RMB 1095 amp. got them from blue jeans cables. I had to use a longer run(12 feet). for 5 cables it cost about $180 bucks with shipping.Heck I thought that was pricey, Ive had them about 2 yrs and love them. everything is dead quiet with them.

PhooNami · 08-21-2009, 06:24 PM

Quote:

Originally Posted by hoogoosedmoose41

I used Beldon XLR cables between my integra prepro and Rotel RMB 1095 amp. got them from blue jeans cables. I had to use a longer run(12 feet). for 5 cables it cost about $180 bucks with shipping.Heck I thought that was pricey, Ive had them about 2 yrs and love them. everything is dead quiet with them.

Thanks for the recommendation, Looking at the Canare Star Quad right now.

CasualKiller · 08-21-2009, 06:37 PM

I'd save your money and just use the analog connections. Unless your gear utilizes true "balanced circuitry" that is normally only found in much more expensive brands and models, then you are really just paying for cables with no improvement in SQ.

You can have balanced outputs on a 100 dollar receiver, but it does not mean that you have balanced circuitry to utilize it properly, I'd investigate further before purchasing any cables...

FreddieFerric · 08-21-2009, 09:17 AM

Quote:

Originally Posted by naturephoto1

Do what you want for your cables. Many swear by Monoprice. However, do you want to use a $7.00 pair of cables between a $2,600 Pre/Pro and a $2,000 amp or use something better?

Rich

Exactly!

Btw, Kevin's cables at 140 are a bargain for the quality.

Johnny Vinyl · 08-21-2009, 09:20 AM

Quote:

Originally Posted by naturephoto1

Do what you want for your cables. Many swear by Monoprice. However, do you want to use a $7.00 pair of cables between a $2,600 Pre/Pro and a $2,000 amp or use something better?

Rich

Quote:

Originally Posted by BluRayFred

Exactly!

Btw, Kevin's cables at 140 are a bargain for the quality.

I agree completely with these statements!

John

richteer · 08-21-2009, 04:01 PM

Quote:

Originally Posted by John72953

I agree completely with these statements!

John

I hate to sound like an AOLer, but "Me too!". :-)

Hammie · 08-21-2009, 02:42 PM

Quote:

Originally Posted by naturephoto1

Do what you want for your cables. Many swear by Monoprice. However, do you want to use a $7.00 pair of cables between a $2,600 Pre/Pro and a $2,000 amp or use something better?

Rich

When I was talking to my wife about getting some pricier speakers and cables, she thought I was an idiot for spending that much money.

So, I asked her why it was alright for her to spend almost $400 dollars for a plastic Louis Vuitton bracelet or $3000 for a handbag when she could go to Wal-mart or Target and get one that looks similar but at a fraction of the cost.

She simply responded touche. She doesn't give me as hard a time anymore.

solarrdadd · 08-25-2009, 03:34 PM

Quote:

Originally Posted by louhamilton

When I was talking to my wife about getting some pricier speakers and cables, she thought I was an idiot for spending that much money.

So, I asked her why it was alright for her to spend almost $400 dollars for a plastic Louis Vuitton bracelet or $3000 for a handbag when she could go to Wal-mart or Target and get one that looks similar but at a fraction of the cost.

She simply responded touche. She doesn't give me as hard a time anymore.

So, how does that couch work out for sleeping!

Adio · 08-26-2009, 08:40 AM

I use monoprice XLR cables between my DHC-9.9 and pair of XPA-5s, and couldn't be happier. Anyone who tries to sell you a high-end expensive cable for a 1.5-3ft pre/pro+amp interconnect is a fool. Balanced cables are only needed for relatively long runs in professional environments. In a home theater, with inches between separates, you won't even notice a difference between XLR and RCA. The only reason I went with balanced was because they are only $6 at monoprice.

naturephoto1 · 08-26-2009, 09:09 PM

Quote:

Originally Posted by Adio

I use monoprice XLR cables between my DHC-9.9 and pair of XPA-5s, and couldn't be happier. Anyone who tries to sell you a high-end expensive cable for a 1.5-3ft pre/pro+amp interconnect is a fool. Balanced cables are only needed for relatively long runs in professional environments. In a home theater, with inches between separates, you won't even notice a difference between XLR and RCA. The only reason I went with balanced was because they are only $6 at monoprice.

Have you made any comparisons with other cables to confirm your assertion regarding cables that are better than your $6 Monoprice cables? I have listened to different cables in my and other set-ups and have found that they can make a difference in the audio performance. Perhaps I am more attuned to the differences or my/our equipment was more sensitive to the changes than yours.

Rich

Halcro 1 · 08-25-2009, 03:05 PM

Quote:

Originally Posted by naturephoto1

Do what you want for your cables. Many swear by Monoprice. However, do you want to use a $7.00 pair of cables between a $2,600 Pre/Pro and a $2,000 amp or use something better?

Rich

+1 on that ...I use Audience AU 24 E

Similar Threads
thread	Forum	Thread Starter	Replies	Last Post
Interconnect cables, Speaker cables & Power Cords.	Audio Theory and Discussion	Johnny Vinyl	556	02-25-2011 12:42 AM
Connecting an Emotiva XPA-5 Amp - RCA or XLR	Receivers	ShyBoy	7	05-10-2009 08:53 PM
Cables	Vinyl and Old School Music	househead	9	05-06-2009 05:29 PM
I'm switching "every HDMI is the same quality" cables for some actual quality cables.	Home Theater General Discussion	pittsgutta	17	02-09-2009 02:40 PM
help with cables	Blu-ray Technology and Future Technology	chuy129	12	03-11-2008 05:06 PM

08-21-2009, 05:54 AM	#4
Sussudio Blu-ray Champion Member since:Sep 2008 Blu-ray collection:1 Blu-ray reviews:1 Trading Score:11	MusiciansFriend.com is a great place to buy audio cables from...I used them for years for my home recording setup and never had a problem

08-21-2009, 07:09 AM	#5
hoogoosedmoose41 Senior Member Member since:Feb 2008 Blu-ray collection:308 DVD collection:103	I used Beldon XLR cables between my integra prepro and Rotel RMB 1095 amp. got them from blue jeans cables. I had to use a longer run(12 feet). for 5 cables it cost about $180 bucks with shipping.Heck I thought that was pricey, Ive had them about 2 yrs and love them. everything is dead quiet with them.

08-21-2009, 06:37 PM	#7
CasualKiller Blu-ray Samurai Member since:Feb 2008 Location:Brooks Alberta Blu-ray collection:54 Trading Score:15	I'd save your money and just use the analog connections. Unless your gear utilizes true "balanced circuitry" that is normally only found in much more expensive brands and models, then you are really just paying for cables with no improvement in SQ. You can have balanced outputs on a 100 dollar receiver, but it does not mean that you have balanced circuitry to utilize it properly, I'd investigate further before purchasing any cables...

08-26-2009, 08:40 AM	#13
Adio Junior Member Member since:Aug 2009	I use monoprice XLR cables between my DHC-9.9 and pair of XPA-5s, and couldn't be happier. Anyone who tries to sell you a high-end expensive cable for a 1.5-3ft pre/pro+amp interconnect is a fool. Balanced cables are only needed for relatively long runs in professional environments. In a home theater, with inches between separates, you won't even notice a difference between XLR and RCA. The only reason I went with balanced was because they are only $6 at monoprice.

Best iTunes Music Deals