onkyo 605 frustration - Blu-ray Forum

dukenukem · 04-03-2008, 05:40 AM

i was able to set up the onkyo605with ps3 succesfullyfor a little bit,but after i shut the ps3 down,unplugged receiver and speakers from outlet,i come back a few hours later and still at this moment when i turn the reciever on it detects the ps3 and strats to go on but then just makes a pop and goes back to standby mode?Any suggestions as to what's going on?

crackinhedz · 04-03-2008, 02:04 PM

sounds like one of your speakers may be plugged in incorrectly. Make sure no strands or speaker wire are touching one another, and make sure positive is to positive and negative to negative.

sticks4legs · 04-03-2008, 02:09 PM

I agree, sounds like you have some sort of connection turning on the protection. You may also want to look for anything else that could be causing it, I have seen RCA cables coming from powered up devices touch the back and it will switch to standy.

dukenukem · 04-04-2008, 03:37 AM

Looked over it and was able to find the strand of wire that was touching the back of the reciever and now all is back to normal.thanks for the help.

04-03-2008, 05:40 AM	#1
dukenukem Active Member Member since:Jan 2008 Home Theater Gallery:23 Blu-ray collection:31	onkyo 605 frustration i was able to set up the onkyo605with ps3 succesfullyfor a little bit,but after i shut the ps3 down,unplugged receiver and speakers from outlet,i come back a few hours later and still at this moment when i turn the reciever on it detects the ps3 and strats to go on but then just makes a pop and goes back to standby mode?Any suggestions as to what's going on?

Similar Threads
thread	Forum	Thread Starter	Replies	Last Post
Onkyo 605 and 7.1	Audio Theory and Discussion	popcornninja	5	10-27-2008 01:18 AM
Onkyo 605	Receivers	tntkain	5	02-14-2008 03:56 AM
Onkyo 705 vs Onkyo 605	Home Theater General Discussion	CRMA	40	02-08-2008 01:39 AM
why onkyo 605 US 90w and onkyo 605 EU is 140W	Home Theater General Discussion	blackend	7	01-15-2008 02:54 PM
need help about onkyo 605 EU	Blu-ray Technology and Future Technology	blackend	2	01-15-2008 04:53 AM

04-03-2008, 02:04 PM	#2
crackinhedz Super Moderator Member since:Feb 2007 Home Theater Gallery:10 Blu-ray reviews:8 Trading Score:19	sounds like one of your speakers may be plugged in incorrectly. Make sure no strands or speaker wire are touching one another, and make sure positive is to positive and negative to negative.

04-03-2008, 02:09 PM	#3
sticks4legs Member Member since:Feb 2007	I agree, sounds like you have some sort of connection turning on the protection. You may also want to look for anything else that could be causing it, I have seen RCA cables coming from powered up devices touch the back and it will switch to standy.

04-04-2008, 03:37 AM	#4
dukenukem Active Member Member since:Jan 2008 Home Theater Gallery:23 Blu-ray collection:31	Looked over it and was able to find the strand of wire that was touching the back of the reciever and now all is back to normal.thanks for the help.

Best Blu-ray Movie Deals