Panasonic BD 30 & Integra 7.8 trouble - Blu-ray Forum

rsmjkm · 06-21-2008, 01:58 PM

I have both units and all is set for HD audio but my Integra only lights up DD or DTS when I have settings for the HD audio. Is it possible the P 30, while bitstreaming, will NOT light up the Tru HD or DTS MA lights on my Integra? Any body know the skinny on these things? Thanks, P,S, I've talked to Integra on the phone and they are absolutely no help. It's a joke!

chasarms · 06-21-2008, 03:08 PM

I have the BD30 and an Onkyo receiver, which should very similar. My BD30 is set to bitstream everything and I always get the correct indicator in the receiver.

I would double check the following:

1. Make absolutely sure that the player is set to bitstream all of the audio.

2. Make absolutely certain that you are setting the disc menu to the HD audio. Many BDs still default to the core.

3. Make sure you listening modes are mapped correctly on the receiver so that, for example, Dolby TrueHD in = Dolby TrueHD out. It is in the listening mode setup menu.

Lastly, just to be sure, are you outputing audio over HDMI? I don't think you can bitstream HD audio via optical.

thebrenn · 06-21-2008, 03:30 PM

You are correct HD audio is only through HDMI on the BD30

rsmjkm · 06-21-2008, 07:39 PM

All is set to bitstream, dvd menu is set to either DD Tru HD or DTS HD MA and am using HDMI and listening modes: If it says on the left DD Tru Hd then on the right I need to say the same, right? It is set up that way. Thanks. Must be something wrong with the receiver, right?

06-21-2008, 01:58 PM	#1
rsmjkm New Member Member since:Jun 2008	Panasonic BD 30 & Integra 7.8 trouble I have both units and all is set for HD audio but my Integra only lights up DD or DTS when I have settings for the HD audio. Is it possible the P 30, while bitstreaming, will NOT light up the Tru HD or DTS MA lights on my Integra? Any body know the skinny on these things? Thanks, P,S, I've talked to Integra on the phone and they are absolutely no help. It's a joke!

Similar Threads
thread	Forum	Thread Starter	Replies	Last Post
Having trouble registering Fast & Furious bd disc..	Newbie Discussion	cqt3112	6	08-03-2009 11:28 PM
Trouble Playing Slumdog Millionaire and Marley & Me!?	Blu-ray Movies - North America	heroesfan110	2	04-04-2009 12:58 AM
Trouble with Panasonic BMP-BD-55 audio	Blu-ray Players and Recorders	triplim	0	01-25-2009 03:37 AM
panasonic bmp-bd-55 trouble	Blu-ray Players and Recorders	dunbar	9	11-11-2008 03:17 PM

06-21-2008, 03:08 PM	#2
chasarms Active Member Member since:Feb 2008 Location:St. Louis Blu-ray reviews: 1	I have the BD30 and an Onkyo receiver, which should very similar. My BD30 is set to bitstream everything and I always get the correct indicator in the receiver. I would double check the following: 1. Make absolutely sure that the player is set to bitstream all of the audio. 2. Make absolutely certain that you are setting the disc menu to the HD audio. Many BDs still default to the core. 3. Make sure you listening modes are mapped correctly on the receiver so that, for example, Dolby TrueHD in = Dolby TrueHD out. It is in the listening mode setup menu. Lastly, just to be sure, are you outputing audio over HDMI? I don't think you can bitstream HD audio via optical.

06-21-2008, 03:30 PM	#3
thebrenn Junior Member Member since:Apr 2008	You are correct HD audio is only through HDMI on the BD30

06-21-2008, 07:39 PM	#4
rsmjkm New Member Member since:Jun 2008	All is set to bitstream, dvd menu is set to either DD Tru HD or DTS HD MA and am using HDMI and listening modes: If it says on the left DD Tru Hd then on the right I need to say the same, right? It is set up that way. Thanks. Must be something wrong with the receiver, right?

Best Blu-ray Movie Deals