No signal from PS3 To Onkyo 605 Help ! - Blu-ray Forum

ale8kid · 08-03-2008, 12:11 PM

I just purchased a Onkyo TX-SR605B from ECost . I hooked it up Via HDMI. I hooked up the HDMI cable to the PS3 To input one on the Onkyo and then hooked up the Onkyo to the tv from the HDMI out of the receiver. The settings are for the game/tv from HDMI 1 on the Onkyo. I can see the on screen display from the receiver when I go to the menu on the tv . So I assume that means I'm getting a signal from the Onkyo to the tv . When I turn on the ps3 I get nothing . I check the display on the Onkyo and it says no signal . I can then hook up the PS3 directly to the tv Via HDMI and have a perfect picture and sound . So I know there is a signal coming from the PS3 . The PS3 was previously hooked up to the tv before I got the Onkyo. The Tv Is a Hitachi 1080i so the PS3 when first hooked up to the tv set its self to 1080i output. Is there a setting on the PS3 that is wrong so that the Onkyo doesn't recognize it maybe . Any help would be greatly appreciated.

crazy25000 · 08-03-2008, 12:23 PM

I have the 605, go to the receivers settings and make sure HDMI Output is turned on.

ale8kid · 08-03-2008, 12:33 PM

Thanks but I do have it turned on . I think there is something wrong with the reciever. I double a triple check all the settings on the reciever and cant find anything wrong.

mastertang · 08-03-2008, 12:36 PM

Also, as long as your receiver is set up to route the HDMI correctly as mentioned above, I'd try a system reset. I think you hold the power switch (keep your finger on the panel) for five or ten seconds and it beeps a second time or something. You will have to set your video and audio up as if it was the first time you turned it on (but all your saved stuff is still on the HD). Your ps3 was likely only set to output pcm 2.0 via HDMI to your TV. Good Luck!

It could be the receiver though. They aren't without lemons, though my brothers works well I've certainly read alot here about people that have random failures of the 605s.

ale8kid · 08-03-2008, 12:40 PM

Thanks I will try that .

crazy25000 · 08-03-2008, 12:43 PM

Quote:

Originally Posted by ale8kid

Thanks I will try that .

I was going to recommend resetting it too, hold down VCR and then push standby

crackinhedz · 08-03-2008, 01:27 PM

so you have these settings already?

HDMI Monitor = Yes

HDMI Audio Out = No

08-03-2008, 12:11 PM	#1
ale8kid Junior Member Member since:Aug 2008	No signal from PS3 To Onkyo 605 Help ! I just purchased a Onkyo TX-SR605B from ECost . I hooked it up Via HDMI. I hooked up the HDMI cable to the PS3 To input one on the Onkyo and then hooked up the Onkyo to the tv from the HDMI out of the receiver. The settings are for the game/tv from HDMI 1 on the Onkyo. I can see the on screen display from the receiver when I go to the menu on the tv . So I assume that means I'm getting a signal from the Onkyo to the tv . When I turn on the ps3 I get nothing . I check the display on the Onkyo and it says no signal . I can then hook up the PS3 directly to the tv Via HDMI and have a perfect picture and sound . So I know there is a signal coming from the PS3 . The PS3 was previously hooked up to the tv before I got the Onkyo. The Tv Is a Hitachi 1080i so the PS3 when first hooked up to the tv set its self to 1080i output. Is there a setting on the PS3 that is wrong so that the Onkyo doesn't recognize it maybe . Any help would be greatly appreciated.

08-03-2008, 12:36 PM	#4
mastertang Active Member Member since:May 2007 Blu-ray collection:62 Blu-ray reviews: 3	Also, as long as your receiver is set up to route the HDMI correctly as mentioned above, I'd try a system reset. I think you hold the power switch (keep your finger on the panel) for five or ten seconds and it beeps a second time or something. You will have to set your video and audio up as if it was the first time you turned it on (but all your saved stuff is still on the HD). Your ps3 was likely only set to output pcm 2.0 via HDMI to your TV. Good Luck! It could be the receiver though. They aren't without lemons, though my brothers works well I've certainly read alot here about people that have random failures of the 605s. Last edited by mastertang; 08-03-2008 at 12:39 PM.

Similar Threads
thread	Forum	Thread Starter	Replies	Last Post
Onkyo 605 + PS3	Receivers	bpcfan	1	09-23-2008 12:38 AM
Signal Drops with PS3 and Onkyo 605	Audio Theory and Discussion	jbragg89	8	05-13-2008 10:46 PM
Onkyo 605 And Ps3!	Receivers	HOME THEATRE ADDICT!	8	05-05-2008 12:06 PM
onkyo 605 and PS3 FW 2.30	Home Theater General Discussion	mercury187	5	04-11-2008 03:41 PM
ps3 and onkyo 605	Home Theater General Discussion	cembros	14	02-05-2008 11:57 PM

08-03-2008, 12:23 PM	#2
crazy25000 Active Member Member since:Nov 2007 Blu-ray reviews:3 Trading Score:16	I have the 605, go to the receivers settings and make sure HDMI Output is turned on.

08-03-2008, 12:33 PM	#3
ale8kid Junior Member Member since:Aug 2008	Thanks but I do have it turned on . I think there is something wrong with the reciever. I double a triple check all the settings on the reciever and cant find anything wrong.

08-03-2008, 12:40 PM	#5
ale8kid Junior Member Member since:Aug 2008	Thanks I will try that .

08-03-2008, 01:27 PM	#7
crackinhedz Super Moderator Member since:Feb 2007 Home Theater Gallery:10 Blu-ray reviews:8 Trading Score:19	so you have these settings already? HDMI Monitor = Yes HDMI Audio Out = No

Best Blu-ray Movie Deals