Playing Blu-Rays on computer to HD TV - Blu-ray Forum

stevo67 · 12-29-2008, 12:00 AM

I have an Acer with Blu-Ray drive and HDMI & DVI out. I can view the TV(HDMI) and monitior(DVI) at the same time no problem. But, when I try to watch a Blu-Ray (with TotalMedia Theatre) I get no audio on the TV. I also have to unplug the monitor DVI cable before launching the disk or it wont work on the TV. My plan to avoid buying a separate Blu-Ray player for the TV is becoming very complicated. Any ideas?

dadkins · 12-29-2008, 12:18 AM

#1 only use one display at a time. HDCP gets upset if you try to use two or more displays when playing a Blu-ray.

#2 see if there are any settings currently, or that happen to appear when a TV is connected via HDMI(my VAIOs show only the laptop display until a HDMI is connected to a HDTV - then there are more buttons to push/click).

Make sure HMDI Audio is enabled when a TV is connected.
Things change when a HDTV is connected and a Blu-ray is running...

riseagainst · 01-02-2009, 04:48 AM

Control Panel > Sound > "Set Default" to Digital Output Device (HDMI)

This will allow sound to pass through television. You will need to go back and set it back to the computer speakers when you are not connected to television.

Similar Threads
thread	Forum	Thread Starter	Replies	Last Post
Will this computer handle burning data blu-rays?	Blu-ray PCs, Laptops, Drives, Media and Software	darkimagesoflight	3	07-06-2009 03:29 PM
A question about playing new Blu-rays	Blu-ray Technology and Future Technology	tru_to_blu	7	01-08-2008 01:55 PM
Skipping when playing Blu-rays?	Newbie Discussion	gmen667	17	01-06-2008 01:28 PM

12-29-2008, 12:00 AM	#1
stevo67 New Member Member since:Dec 2008	Playing Blu-Rays on computer to HD TV I have an Acer with Blu-Ray drive and HDMI & DVI out. I can view the TV(HDMI) and monitior(DVI) at the same time no problem. But, when I try to watch a Blu-Ray (with TotalMedia Theatre) I get no audio on the TV. I also have to unplug the monitor DVI cable before launching the disk or it wont work on the TV. My plan to avoid buying a separate Blu-Ray player for the TV is becoming very complicated. Any ideas?

12-29-2008, 12:18 AM	#2
dadkins Blu-ray Samurai Member since:Jan 2007 Location:Hercules, CA Blu-ray collection:35 Blu-ray reviews:2	#1 only use one display at a time. HDCP gets upset if you try to use two or more displays when playing a Blu-ray. #2 see if there are any settings currently, or that happen to appear when a TV is connected via HDMI(my VAIOs show only the laptop display until a HDMI is connected to a HDTV - then there are more buttons to push/click). Make sure HMDI Audio is enabled when a TV is connected. Things change when a HDTV is connected and a Blu-ray is running...

01-02-2009, 04:48 AM	#3
riseagainst Member Member since:Oct 2008 Blu-ray reviews: 2	Control Panel > Sound > "Set Default" to Digital Output Device (HDMI) This will allow sound to pass through television. You will need to go back and set it back to the computer speakers when you are not connected to television.

Best Blu-ray Movie Deals