Sub Question

[erict]

Originally Posted by forsberg21

Yep, here are the steps from BD's sticky:



It is from this sticky, A Guide to Bass Management....https://forum.blu-ray.com/showthread.php?t=95817

Originally Posted by forsberg21

Believe it or not, but you can't set individual crossovers for your speakers in the SC-05, it defaults to 80Hz when you set them to small. I can adjust the LFE, but it runs from 80Hz, 100Hz and jumps up to 150Hz, so I have my LFE set at 100Hz. Don't know why they don't have a 120hz setting. I found that very strange for such an incredible AVR.

I did notice in my receiver that there is a speaker level setting screen to adjust all speakers including the subwoofer which I understand but there is also a LFE level setting screen that has a range of -20db to 0db which is set to 0db. What is that for?

Here is a quote from my manuel.



Bass cross over CROSS OVER
Use this feature to select the crossover frequency of all the
speakers set to “SML” (or “SMALL”) in “SPEAKER
SET” (see page 85). All frequencies below the selected
frequency will be sent to the subwoofer(s) or front
speakers depending on the setting of “LFE/BASS OUT”
in “SPEAKER SET” (see page 85).
Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, 110Hz,
120Hz, 160Hz, 200Hz