Power Conditioner for Sub - Blu-ray Forum

-DLS- · 01-28-2009, 11:39 PM

I read this on a review for an APC H15 Power Conditioner.

"The only issue I had with the H15 was its interaction with a subwoofer. Some amps are designed such that they will fool the H15 into thinking that it is in a low voltage situation. The H15 will naturally boost the voltage to accommodate. This can blow the fuses on the sub amps which have very tight operational tolerances (provided they have them). I had this happen twice before I discerned it was the H15/sub interaction. From the standpoint of blame - it's hard to find a culprit. The amp is doing what it is supposed to be doing and the H15 is doing its job. My suggestion is to connect the H15 to a subwoofer with caution. Under normal circumstances this shouldn’t be an issue, but if you find a similar experience when you plug your subwoofer into this unit, disconnect it and plug it into a standard surge protector (APC makes plenty of these as well). I would like to note that I had a number of receivers plugged into the H15 without a problem so my issue may be isolated specifically to the subwoofer I was using in this review."

http://www.audioholics.com/reviews/p...and-conclusion

Other power conditioners would maybe act the same way. I plugged my sub to a surge protector by itself. My other stuff will be going into the APC that I just ordered (for a great price - $149 on audioholics.com).

Similar Threads
thread	Forum	Thread Starter	Replies	Last Post
Power Conditioner	Home Theater General Discussion	tmgrich	19	10-15-2015 08:12 PM
Power conditioner? Is it for me?	Home Theater Construction	ryandubbz	128	03-30-2010 04:25 AM
Which Power Conditioner?	Home Theater General Discussion	Massacre1	12	02-16-2010 04:18 PM
Power Conditioner VS Power Strip/Monster VS Panamax	Home Theater Construction	umich08	6	02-09-2010 08:03 AM
Power Conditioner	Home Theater General Discussion	savage1984	62	05-29-2008 12:51 AM

01-28-2009, 11:39 PM	#12
-DLS- Special Member Top ranked HT gallery Top contributor Member since:Apr 2008 Location:CANADA Home Theater Gallery:28 Blu-ray collection:-	I read this on a review for an APC H15 Power Conditioner. "The only issue I had with the H15 was its interaction with a subwoofer. Some amps are designed such that they will fool the H15 into thinking that it is in a low voltage situation. The H15 will naturally boost the voltage to accommodate. This can blow the fuses on the sub amps which have very tight operational tolerances (provided they have them). I had this happen twice before I discerned it was the H15/sub interaction. From the standpoint of blame - it's hard to find a culprit. The amp is doing what it is supposed to be doing and the H15 is doing its job. My suggestion is to connect the H15 to a subwoofer with caution. Under normal circumstances this shouldn’t be an issue, but if you find a similar experience when you plug your subwoofer into this unit, disconnect it and plug it into a standard surge protector (APC makes plenty of these as well). I would like to note that I had a number of receivers plugged into the H15 without a problem so my issue may be isolated specifically to the subwoofer I was using in this review." http://www.audioholics.com/reviews/p...and-conclusion Other power conditioners would maybe act the same way. I plugged my sub to a surge protector by itself. My other stuff will be going into the APC that I just ordered (for a great price - $149 on audioholics.com).

Best Blu-ray Movie Deals